Just like our GlitterFlex® Ultra, but is a unique, perforated glitter with 2mm holes. Contains real glitter flakes encased in high quality heat-sealing adhesive. Feels lighter and adds breathability to larger designs. It has a pressure-sensitive carrier that enables easy weeding and repositioning.
- High-quality glitter with a textured feel
- Glitter can be layered as top level or inlay
- Approximately 325 Microns/12.8 Mils thick
- Note: Material may peel back from liner. In that case, we recommend smoothing it down, if needed, prior to cutting
- Material may vary in width by an 1/2″ – 1″
- Not made for fine-cut designs
- 15 seconds
- Peel hot or cold
- Medium to firm pressure
- Cut mirror image
- Cotton, polyester, fabric blends
- Wash warm, tumble dry normal
20″x 12″ sheets
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
- All measurements are +/- 1/2″
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test cutting is recommended.
1. Flocked Heat Transfer Setting
2. Blade at a 3
3. Speed at 5, Pressure at 33